The quantitative capacity of
water to neutralize an acid; that is, the measure of how much acid can be added to a
liquid without causing a significant change in pH.
Alkalinity is not the
same as pH because water does not have to be strongly basic (high pH) to have high
alkalinity.
Alkalinity is related to the amount of
dissolved calcium, magnesium, and other compounds in the water and as such,
alkalinity tends to be higher in "harder" water. Alkalinity is
naturally decreased over time through bacterial action which produces acidic
compounds that combine with and reduce the alkalinity components.
In an established pond, the ideal Alkalinity measurement should be
around 100 ppm. Readings from 50 to 200 are acceptable.
High alkalinity is normally prevented by routine water change outs
assuming the water being replenished has a lower alkalinity than the pond water.
Ponds with vinyl liners or of fiber glass construction
tend to show a decrease in alkalinity over time and may need supplements to maintain
an acceptable level. Raise alkalinity by adding Calcium Carbonate, concrete blocks,
oyster shells, limestone, or even egg shells.
Established
ponds will normally maintain their equilibrium pH value if sludge and decaying
organic material is routinely removed from the pond, mechanical filter, and
biological converter. Scheduled water change outs (10% per week for a small
pond, less for larger ponds) are also helpful.
See Also:
pH in
Ponds |